AD603AQ

Запросить




AD603AQ характеристики

Программируемый/переменный усилитель, 1 канал(-ов), 1 Усилитель, 90 МГц, -40 °C, 85 °C.



The AD603AQ is a low noise Voltage-controlled Amplifier for use in RF and IF AGC systems. It provides accurate, pin-selectable gains of -11 to +31dB with a bandwidth of 90MHz or +9 to +51dB with a bandwidth of 9MHz. Any intermediate gain range may be arranged using one external resistor. The input referred noise spectral density is only 1.3nV/?Hz and power consumption is 125mW at the recommended ±5V supplies. The decibel gain is linear in dB, accurately calibrated and stable over temperature and supply. The gain is controlled at a high impedance (50MR), low bias (200nA) differential input, the scaling is 25mV/dB, requiring a gain control voltage of only 1V to span the central 40dB of the gain range. An overrange and underrange of 1dB is provided whatever the selected range. The gain control response time is less than 1µs for a 40dB change. The differential gain control interface allows the use of either differential or single-ended positive or negative control voltages.

подробнее

Линия Продукции AD603 Series
Ничего не выбрано
Количество Выводов 8вывод(-ов)
Минимальная Рабочая Температура -40°C
Максимальная Рабочая Температура 85°C
Упаковка Поштучно
Уровень Чувствительности к Влажности (MSL) -
Полоса Пропускания 90МГц
Диапазон Напряжения Питания ± 4.75В до ± 6.3В
Количество Каналов 1канал(-ов)
Стиль Корпуса Усилителя DIP
Количество Усилителей 1 Усилитель

Техническое описание

Вы можете купить AD603AQ от 1 штуки. Работаем с частными лицами и с юридическими лицами по безналичному расчету.

Цену AD603AQ и наличие сообщим по вашему запросу.