31001110

The 31001110 from Metz Connect is RT015xxHDWC (Type 001) grey colour screw type solderable terminal block with 10 poles. It has 5mm centreline pitch and 90° direction of connection. It has extended wiring UL (wire range extended to number 30AWG for factory wiring. Two same size wires number 22-18AWG Cu Sol/Str for field wiring, number 30-18 Cu Sol/Str factory wiring), cRJUS (300V / 15A / 22 to 14AWG), SEV (130V / 17.5A / T60) approvals.

• Wire protector, fittable without loss of poles
• 0.4Nm (UL), 3.5lb-in (SEV) tightening torque, M3 screw thread, Sn wire protector surface
• PA66 insulating material (class CTI 600), CuZn terminal body material, Ni + Sn terminal body surface
• Rated wiring solid wire range from 0.34mm? to 2mm?
• Rated wiring stranded wire range from 0.34mm? to 2mm?
• Clearance and creepage distances is 2.6mm, solder pin length is 3.8mm
• IP 10 protection category according to IEC 60529, minimum insulation strip length is 6mm
• Lower limit temperature is -40°C, upper limit temperature is 105°C
• Overvoltage category III, pollution degree 3, 63V rated voltage, 2.5KV rated test voltage
• 0.9mm solder pin dimension, 1.3mm recommended PC board hole diameter