LM75BIM-3+

Запросить




LM75BIM-3+ характеристики

Датчик температуры (ИС), 2 провода, Цифровой, ± 3°C, -55 °C, 125 °C, NSOIC, 8 вывод(-ов).



The LM75BIM-3+ is a digital temperature sensor and thermal watchdog with 2-wire interface in 8 pin NSOIC package. This industry standard multi sourced sensor includes delta-sigma analogue to digital converter and digital overtemperature detector. The host can query LM75 through its I2C interface to read temperature at any time. The open-drain overtemperature output (OS) sinks current when the programmable temperature limit is exceeded. The host controls the temperature at which alarm is asserted (TOS) and hysteresis temperature below which the alarm condition is not valid (THYST). The TOS and THYST registers of LM75 can be read by the host. The address of LM75 is set with three pins to allow multiple devices to work on same bus. Power-up is in comparator mode with defaults of TOS = 80°C and THYST = 75°C. The 3V to 5.5V supply voltage range, low supply current and I2C interface make the LM75 ideal for many applications in thermal management, thermal protection and test equipment.

подробнее

Линия Продукции -
Ничего не выбрано
SVHC (Особо Опасные Вещества) To Be Advised
Количество Выводов 8вывод(-ов)
Упаковка Поштучно
Уровень Чувствительности к Влажности (MSL) MSL 1 - Безлимитный
Тип Выхода Микросхемы Цифровой
Максимальное Напряжение Питания 5.5В
Минимальное Напряжение Питания
Стиль Корпуса Микросхемы Датчика NSOIC
Диапазон Точности Измерения ± 3°C
Минимальная Измеряемая Температура -55°C
Максимальная Измеряемая Температура 125°C

Вы можете купить LM75BIM-3+ от 1 штуки. Работаем с частными лицами и с юридическими лицами по безналичному расчету.

Цену LM75BIM-3+ и наличие сообщим по вашему запросу.



Сопутствующие товары
Мультиадаптер, SMD, FR4, стеклоэпоксидный композит, 1.5мм, 58.5мм x 88мм
от 3421.44 ₽
+12830.4 на ваш счёт