SN65HVD101EVM

The SN65HVD101EVM is an evaluation platform for SN65HVD101 and SN65HVD102 devices. The SN65HVD101 and SN65HVD102 IO-LINK PHYs implement the IO-LINK interface for industrial point to point communication. When the device is connected to an IO-Link master through a three wire interface, the master can initiate communication and exchange data with the remote node while the SN65HVD101/102 acts as a complete physical layer for the communication. The IO-LINK driver output (CQ) can be used in push pull, high side or low side configurations using the EN and TX input pins. The PHY receiver converts the 24V IO-LINK signal on the CQ pin to standard logic levels on the RX pin. A simple parallel interface is used to receive and transmit data and status information between the PHY and the local controller.