SN74LVT16245BDL

Запросить




SN74LVT16245BDL характеристики

Приемопередатчик, неинвертирующий, 3 состояния, 2.7В до 3.6В, SSOP-48.



The SN74LVT16245BDL is a 16-bit Bus Transceiver with 3-state outputs. The non-inverting 3-state transceiver is designed for low-voltage (3.3V) VCC operation, but with the capability to provide a TTL interface to a 5V system environment. It is also designed for asynchronous communication between two data buses. The logic levels of the direction-control (DIR) input and the output-enable (OE) input activate either the B-port outputs or the A-port outputs or place both output ports into the high-impedance mode. The device transmits data from the A bus to the B bus when the B-port outputs are activated and from the B bus to the A bus when the A-port outputs are activated. When VCC is between 0 and 1.5V, the device is in the high-impedance state during power up or power down. However, to ensure the high-impedance state above 1.5V, OE should be tied to VCC through a pull-up resistor and the minimum value of the resistor is determined by the current-sinking capability of the driver.

подробнее

Тип Логического Устройства Приемопередатчик, Неинвертирующий
Ничего не выбрано
Стиль Корпуса Микросхемы Логики SSOP
Количество Выводов 48вывод(-ов)
Минимальное Напряжение Питания 2.7В
Максимальное Напряжение Питания 3.6В
Минимальная Рабочая Температура -40°C
Максимальная Рабочая Температура 85°C
Упаковка Поштучно
Линия Продукции -
SVHC (Особо Опасные Вещества) No SVHC (15-Jun-2015)
Уровень Чувствительности к Влажности (MSL) MSL 1 - Безлимитный

Вы можете купить SN74LVT16245BDL от 1 штуки. Работаем с частными лицами и с юридическими лицами по безналичному расчету.

Цену SN74LVT16245BDL и наличие сообщим по вашему запросу.